How to Get Rid of Iron Bacteria
Iron bacteria are generally a natural occurring organism. It usually survives by receiving energy by oxidizing ferrous iron into insoluble ferric iron. When that happens, it appears to be in a rust-colored deposit. They often resemble into a protective slime layer which makes them very resistant to elimination. The slimy substance sticks tightly to the lining of pipes and plumbing fixtures. That will result to clog well screens, plumbing and reduce well yields. Also, this is the reason why the water can produce a foul smell.
Although this is proven to non-harmful to humans, nobody should leave this problem unattended. Who would want to have this foul smell every time you flush your toilet? Fortunately, there are some ways that can be done to eliminate these iron bacteria. Some procedures may be challenging but it’s definitely worth it if it’s going to get rid of that bacteria and foul smell.
Most of the home owners know that chlorine can be a powerful disinfectant. However, when dealing with these particular bacteria, it can still be a challenge. The slimy characteristics of iron bacteria keep the disinfectant from penetrating beyond the surface cells. Also, the well water’s components can technically absorb much of the chlorine before it can even go through the iron bacteria. This procedure is more than just pouring chlorine into the well water.
First you have to prepare approximately 8 quarts of 5.25% household chlorine bleach. Mix it with 100 gallons of water. The goal in this kind of setup is to prepare twice or thrice the amount of water standing in the well.
Next is to pour the solution into the well. Locate a hose bib and attach another hose into that. Then get the other end of the hose and place it directly into the hose well as well. Then open the faucet and let the water circulate for at least an hour. Remember to open all your faucets inside your house until you can smell the scent of chorine, that’s the time to close it.
Leave this kind of setup for about 24 hours before removing the system free of chlorine. It is better if you have a chlorine test to make sure that there is at least 10ppm of chlorine left in the water well after 24 hours. If you have lesser that 10ppm, you can repeat the process until the desired outcome is achieved.
If everything goes well, it is time to let go of the chlorinated water. Eliminate the water by running it outdoors on a field. Remember that this is a strong solution. It can kill you plants and grass and it can have negative effects on the septic tanks too.
Iron bacteria in wells do not lead to health problems, but they can have awfully horrendous consequences. To do away with iron bacteria, blend 100 gallons of water with eight quarts of chlorine bleach. Take out or unfasten the upper shell of the well. Be certain that you shut down the electrical supply for the pump. Impel the chlorine solution to the well continuously. Switch the power on once more. Place a clean water hose into the well and allow the water to flow for an hour in order to give way for the redistribution of chlorinated water. It will clean the interior of the well container and the pump piping too. As soon as you can get a whiff of chlorine in the water, you can put off the faucet. Let the chlorine solution settle in the well overnight.