How to Get Rid of Faux Brick
Faux brick has become very famous because it emulates the style of brick. And you must have to admit; this hasn’t and will never go out of style. If you want a more classic look with a rustic but elegant appearance, using faux brick is the best choice most especially when you are in a tight budget. It also goes with different colors and is readily available in any hardware stores and even online.
Nevertheless, not everybody sees faux brick that way. For some, it may look very ancient or even dirty-looking. Some people would prefer a home that has is suited for the present generation that we are in right now. So for other people who just bought a house with faux bricks, getting rid of them may take a little planning and strategy. Here are some tips that would hopefully help you:
Have it tested first
Cut a small section from the wall of faux bricks first. This test is to check if that brick contains asbestos. This is very important because the inhalation of asbestos fibers is a dangerous substance. It can cause some serious illness like lung cancer and mesothelioma. So if the tests will show that it’s positive for asbestos, hire a professional to remove them all. If you don’t want to risk it, you can just leave it or you can leave it that way and cover it with dry wall after being sealed. If the test says otherwise, read on the next steps.
Use a circular saw
First thing first, you should lay down a drop cloth or a bunch of newspapers below to collect any dust that may fall down during this process. Next thing is to make sure that you have turned off all the circuits in the room. Now, with you circular saw (with an abrasive blade); cut a small square in the faux brick. Don’t forget to set the blade so that it will be in a shallow depth. Estimate your cut to one-half of an each. This way, it will not cut any electrical wires. Next thing is to insert the pry bar into the square. Finally, work the faux brick from the wall by gently pressing the pry bar handle to the wall.
Hammer and chisel
Faux bricks are usually glued in place. With this kind of setup, there is really no way to remove them neatly. Now, with your hammer and chisel, carefully work your way around the box to pry the bricks off. After you have done this to the rest of the bricks, it is best that you remove the dry wall as well just to save time. If everything runs smoothly and successfully, you can now install the new surface that you want.
There are some instances that removing it is just so time-consuming and tiring. If you don’t want the appearance of the faux bricks, you can hide it by painting it with you preferred color. Just make sure that it’s a good quality paint and follow the instructions. You’ll be amazed by the transformation.
Faux brick has become extremely popular due to the brick design it attempts to appear as. If you fancy a rather traditional vintage feel with a tarnished yet chic look, employing faux bricks is the top pick particularly if you need to stay within your expense means. However, not all agree with this. Other people think they seem really old or even filthy-looking. Hence for them who just purchased a home with faux bricks, doing away with the bricks is vital.
There exist several cases when taking out the bricks takes quite so long and is very strenuous. If you don’t like how the faux bricks look, then you can hide it through painting it with your color of choice. Just ensure the paint applied is top-quality and go by the set directions. You’ll be stunned by the results.
Other Articles To Enjoy