How To Get Rid Of Phosphates
Phosphate is a chemical that most commonly used in fertilizing plants. If you are keeping a garden, then you most probably have used phosphate to make your lawn grow more luscious. However, although phosphates can help in developing plants, it might also contribute in allowing growth of unwanted algae. If you have a pool or pond in your home, then you know how unwanted these algae can be. They make your pool water become unclear and dirty. So if you want these algae to go away, then you should get rid of phosphates first.
Removing phosphates requires effort but it is actually not too difficult. You will most likely need to get things from the hardware store first before you can really get rid of the phosphates. Even though the phosphate removal treatment may cause you to spend some bucks, it is well worth it. So if you want to keep your pool clean and clear, here are some things that you can follow to get rid of phosphates.
Get phosphate treatments
Before you can administer your phosphate removal, you will first need to buy and get the materials that you will need in treating your pool. You should first get DPD colorimetric tester and lanthanum carbonate phosphate remover. You can get these things from the hardware or pool supply store.
Test your pool’s chlorine level
You cannot actually just use phosphate removers to clean up your pool, you need to test the water first and determine its chlorine level. To do this, get the DPD colorimetric tester that you have bought. This tester usually comes with a color strip or chart and other solutions.
So first, get test water from the pool using the test vial. Get the R-0001 solution and add a drop of it to the test vial. Add another drop from the R-0002 solution. Wait for a couple of seconds for the solution to turn into a different color. Then, get the color strip or chart and compare the color of the solution. From comparing them, you will determine the chlorine level of the water from your pool. If it turns out to be less than 3 parts per million, then you should not use the phosphate remover.
Clean up your pool
If the amount of phosphate is not too much, then you can opt to drain the water from your pool and clean it up. This will help remove dirt, algae and phosphorus chemicals that may have stick to your pool. After you have cleaned it up, you can just refill the pool with clean water.
To prevent the buildup of phosphate, remember to clean your pool regularly.
Use phosphate remover
If the chlorine level is higher than 3 parts, then you may have to use the phosphate remover. Be sure to get the lanthanum carbonate-based remover because it is the one that removes phosphates very effectively. You can just read the directions on the product’s label to see how it is applied. Remember to carefully add the product to your pool to avoid any damage.
Consult a professional
If you are wary about treating your pool by yourself, then you can consult a professional pool cleaner. Of course, you will need to pay him some cash, but rest assured, the phosphate will be removed without too much effort on your part.
Other Articles To Enjoy
- How To Get Rid Of Leaves In A Pool
- How To Get Rid Of Metal Stains In Pool
- How to Get Rid of Above Ground Pool