How To Get Rid Of:

How To Get Rid of Slime Mold

Are there grimy slime molds in your lot? Do you want to get rid of them but don’t know how to? Slime molds are probably one of the most unpleasant things that may sprout in your yard. They look nasty and make your home unclean.

The good news is that removing slime molds can be quite easy. You can just use some home products and scoop away these unwanted waste in your yard. Here are some things you can do to get rid of slime molds.

Clean up the area

Before you remove the slime molds, you should first clean up the surrounding area to ensure that the slime molds cannot multiply anymore. The more dirt there is, the higher the possibility that the slime molds will keep on spreading. These unwanted growth in your yard multiply because of any decaying material like rotten fruits or dried leaves so as much as possible, make your yard clean and clear from garbage.

Use pressure washer

One way to loosen up the slime molds from the ground is to use a pressure washer. If you do not have a pressure washer, a high-pressure hose is fine. Simply try to direct the water flow to the slime molds and let the water pressure wash it away. When the slime molds have been dislodged, then you can already remove it from the ground.

Scrape up the slime mold

To remove the slime molds, you can first run a rake to dislodge them. Then, using a gardening spoon or a similar item, scoop up the slime molds. Place it inside a garbage bag. Remove the slime molds until you have removed everything you can from the ground. When the slime mold clump has been removed, you can use the pressure washer again or garden hose to clean up the area. Dispose the slime molds properly.

Kill it with bleach

If the slime molds are too much and you cannot easily remove them by just water pressure, then you can use bleach to kill it first. Bleach is very effective in killing many types of fungi. Simply create a mixture out of chlorine, water and laundry detergent. Fill up a bucket with about a gallon of water and add a cup of bleach and half a cup of laundry detergent. Bleach is powerful so it might leave stains in dark-colored grounds. If the slime mold is in wood or dark-colored cement, then you should use color-safe bleach or just detergent.

Pour this solution directly to the slime molds. Leave it for a couple of minutes until you see that the slime molds have turned a lighter color. This is usually a signification that the slime mold is dying.  Test if it is already easy to remove. Just scoop up the dead slime molds and place in your garbage bag.

Use vinegar

If there are plants growing in the area where the slime molds are, you should use vinegar instead because it is less harmful to the soil than bleach. Pour the vinegar all over the slime mold and then wait for a few hours for it to work. Clean up residue once the slime molds have been killed.

Sprinkle baking soda

Another alternative slime mold killer is baking soda. Baking soda is usually safer to use because it has little side effects, but it takes time before you can see results. Simply sprinkle a generous amount of baking soda all over the clump of slime molds. Leave this overnight and check in the morning if the roots have loosened up. Remove the slime molds and throw in a safe place afterwards.

What worked for you?

Copyright © 2011 | About us | Archives | Contact Us | Privacy Policy