How To Get Rid Of Tile Glue
Are you renovating a room in your house? Do you want to change it for the better? When transforming a room style, one of the most commonly done activities are moving furniture around, putting up decorations, replacing wallpaper or paint color and in some cases, removin.eve the tiles. Removing and replacing tiles is not done very often mainly because it is a daunting task to do, not to mention, it is quite costly. When removing tiles, you would have to remove them one by one and then, you will meet one of the hardest things to get rid of from your floor, which is the tile glue.
Tile glue keeps tiles firmly in place. They are the ones that make the tile stick to the ground so you can just imagine its adhesiveness. That being said, because of its tough nature, it is pretty difficult to remove. But if you really want to replace your tiles, you must clean up the tile glue first. To make your task less challenging, you can follow these tips on how to get rid of tile glue.
Heat it up
The first thing you need to do to remove the tile glue is to heat it up. The heat will make the glue softer and easier to scrape. You can use a hair dryer to do this. Just blow dry the tile glue in high heat for a couple of minutes until you see that the tile glue will be easier to remove.
Aside from heating up the tile glue with hair dryer, you can also just spray WD-40 into it. The heat of WD-40 will somehow make the adhesive easier to get rid of. Simply apply the WD-40 on the tile glue and leave it to work for about 10 minutes. Check the tile glue every now and then to see if it has become softer.
Scrape up the melted glue
Once the tile glue has softened, simply get a scraper or any blunt-edged thin object that you can use to remove the glue. Just scrape the adhesive off of the floor. Place the removed melted glue in a container to prevent having a messy work place.
Freeze up the tile glue
Aside from heating it up, an alternative way is to freeze up the tile glue as when it becomes frozen; it will be brittle and can be easily broken down. Simply set dry ice on the tile glue and leave it to work for just a few seconds. Once you see that the tile glue has been frozen, you can break down the tile glue first and then scrape the remaining pieces.
Soak with soapy water
When you soak the tile glue in soapy water, its adhesiveness becomes weaker, thus, making the glue easier to scrape. Simply get some warm water and add about two tablespoons of liquid dishwashing soap into it. Mix the solution and apply directly on the tile glue. Leave the solution to be absorbed by the glue for a few minutes. Afterwards, you can now removing the remaining tile glue with a scraper in an easier manner.
Clean up the residue
Once you have removed the tile glue with the methods mentioned above, clean up the floor by scrubbing with a brush and some more soapy water. Let the area dry and you can now place the new tiles.