How to Get Rid of Toilet Rust
You may have to wonder, in every movie you watch where a drunken person has to vomit, why would they start hugging a toilet bowl? Aside from the obvious fact that toilet bowls harbor bacteria due to the fact that they are the recipient of human waste even though they are constantly flushed out, there are times that they can really look filthy.
Since hard water is rich in minerals such as iron, this usually results in stains that you would normally see in the toilet bowl as well as the surrounding area. This stain is known as toilet rust; they look like rust but are actually far from it. This stain is an accumulation of mineral deposits from the water that we use in the bathroom.
Toilet rust builds up over time and they can be hard to remove. There are times that when you do get the time to remove them, they may have already caused a permanent stain on the surface of your toilet. There are several methods that you can do to remove toilet rust and here are some of those procedures to help you out:
Clean your bathroom regularly
Toilet rust is the result of mineral solids from water building up over time. It is obvious that you don’t immediately see the effects and you don’t want to wait for it to show up. Regularly cleaning and scrubbing the bathroom can prevent the build up of toilet rust. They are usually spotted at the corners of the toilet so make sure that you get into these sections. Wash the surrounding area with soap mixed with bleach and make sure that you rinse and wipe it thoroughly to make it dry faster. Do not allow water to settle in an area since mineral deposits can cling on the surface if left for a long time.
Clean with vinegar solution
If you see streaks of stain on the surface of your tiles or on the toilet bowl, immediately remove them. One of the best solutions that you can use is a mixture of water and vinegar. Dab the solution with a sponge and apply it directly to the affected area. Buff the stain and make sure that you let it settle on the stain for at least a few minutes. Brush off the stain and rinse with water and wipe until it is dry.
Use commercial cleaning solutions
You can purchase commercial grade cleaning solutions that contain chemical such as oxalic acid to remove toilet rust. These are high grade cleaning solutions and you should wear protective gear such as hand gloves when using them. Like other cleaning solutions, you should apply it directly to the stain and let it set before scrubbing it off, rinsing and allowing it to dry.
If there are stubborn stains left on the surface of your toilet bowl, it’s high time that you use pumice stone to remove it. Before you use the stone, soak it in water. If you notice, pumice stone is very abrasive and it is harder than the water minerals so it should be easy to remove them. You don’t have to worry about scratching the toilet bowl since the toilet bowl is harder than the pumice stone if it’s made from porcelain. Wet the stone as it has tendency to dry up and slowly work your way around the other stains.
Other Articles To Enjoy
- How To Get Rid Of Ring Around Toilet
- How to Get Rid of Toilet Smell
- How To Get Rid Of Metal Stains In Pool