How To Get Rid Of:

How To Get Rid Of Sediments From Water Heater

If you live in a cold place, then water heater is one of the most haves in your home. The human body is not very accustomed to very low temperatures so in order to keep the warm blood circulating around your body, you need to use hot water – and the water heater is the device responsible in converting cold water to warm water. Even though water heaters do not require to be maintained often, you still have to clean it up every now and then. Failure to do so can result in water sediments that can slow down the process of the water heater, and even break it down. While some of the water heaters are designed to filter water sediments, there are just some particles that escape and clog it up. So before any big damage can occur, it is important to remove sediments on your water heater tanks.

There are many types of sediments that may fill up your water heater tanks. Some of the most common examples are sand and small rocks. If you want these things removed from your water heater, you only need to clean up your water heater system and install devices that can filter those water sediments. Here is a simple step by step instruction on how to get rid of sediments from water heater.

Shut down the water heater

The first thing that you should do is to shut down your water heater operation. Of course, it you do not want to risk yourself being injured during the first step of the process, you should remember to turn off the water heater before tinkering with it. You can shut down the electric water heater by switching off the breaker or, for water heaters powered by gas, turning off the water temperature control.

Place a garden hose

The garden hose will help the water sediments flow out of the water heater system. Simply get a long garden hose and set it up to the drain valve of your water system tank. Then, place the other end of the garden hose outside your lawn or near a canal. Do not use your tub or sink as drainage canal because it will just reabsorb the sediments again and make it settle back on your water heater system.

Turn on the water system

To flush out the sediments from your water heaters, you have to turn on all the faucets and showers around your house. Open the drain valve of the water heater and use the pressure release valve on your tank so that the water coming from all the sides of the house will be able to push down the water sediments towards the garden hose and outside to your lawn. Try to drain as much water as possible but do not engage too much pressure at it might damage your water heater system.

Turn off the water system

After you have finished draining as much water as you can, turn off the faucets again. Use the cold water valve on your water heater system to flush out any remaining sediments and then close the drain valve.

Ask a professional

If you do not know how to tinker around with your water heater, you can ask a professional to do it for you. You can also ask him to help you install a water heater filter so that the sediments will not clog up your water heater system.  Check with sites such as Service Magic to find local contractors in your area that will give you a quote online.


What worked for you?

Copyright © 2011 MyGetRidOfGuide.com | About us | Archives | Contact Us | Privacy Policy